Independent retailer notice: Home Builder Blinds is an independent window-treatment retailer and is not affiliated with, endorsed by, or sponsored by Oak Creek Homes. "Oak Creek" is a trademark of its respective owner and is referenced here only to describe the kinds of HUD-code manufactured and mobile homes our blinds commonly fit. The size bands below reflect general factory-built housing call-size tendencies (similar to common MH window modules) — not any manufacturer's proprietary floor-plan specifications. Series, plant, and model year vary. Always measure your own openings before ordering.
Window Patterns in Oak Creek Manufactured Homes
Oak Creek plans sold through Texas retailers share the same factory-built window constraints as national MH brands. Measure on site after set-up — especially if any windows were replaced.
- Single-wide bedrooms: narrow openings in the low-to-mid 20s and 30s
- Double-wide living areas: wider horizontal sliders
- Shallow vinyl jambs common on factory frames
- Patio doors on many multi-section plans
- Texas heat — moisture-resistant vinyl mini and faux wood hold up well
Most Common Blind Sizes
Typical manufactured-home width bands we see most often — representative stocked widths link below; always measure your exact opening before ordering:
| Window opening | Typical blind width | Common room |
|---|---|---|
| 22"–28" | 23.5" | Small bedroom / bath |
| 30"–36" | 29.5" | Primary bedroom |
| 35"–36" | 34.5" | Wider bedroom (when present) |
| 48"–60" horizontal | 57.5" | Living-area slider |
| 68" × 80" patio | 68" | Rear patio / deck door |
For the complete opening-to-blind chart, door and sidelight sizing, and room-by-room ranges, see our standard builder blind sizes guide.
Shop common production-home widths
These stocked widths match most new-build openings nationwide. Custom cut to your exact length — free shipping on every order.
Free whole-home planner
Plan your whole Oak Creek home
Planning blinds for a whole Oak Creek single-wide or double-wide? Use the homeowner planner to map rooms, then measure each factory opening before you order.
What Oak Creek Owners Usually Buy
Oak Creek owners in Texas often order vinyl mini for bedrooms and faux wood or verticals for living areas. We ship nationwide and offer free measure-and-install quotes in Dallas–Fort Worth.
1" vinyl mini blinds
The default on manufactured-home bedrooms and baths — custom width to the exact opening, cordless lift, slim headrail for shallow jambs.
Shop 1" vinyl mini blinds
2" faux wood blinds
Living-room upgrade when you want a finished look — outside mount on the trim face is common when inside depth fails.
Shop 2" faux wood blinds
3.5" vertical blinds
Living-area horizontal sliders and patio doors — 68×84 and 78×84 pairs cover many double-wide modules once you confirm the opening.
Shop 3.5" vertical blinds
Roller shades
Clean fabric line for patio doors and wider living-area glass when depth or outside-mount clearance allows.
Shop roller shadesHow to Confirm Your Exact Size
The patterns above are a starting point — your specific floorplan and any builder upgrades can shift them, so always measure. Measure each opening's width at the top, middle, and bottom and height at left, center, and right. For an inside mount, report the exact opening and the factory deducts about ½" for clearance; for an outside mount, add 1.5–2" of overlap per side. Our measuring & installation guide has step-by-step instructions.
Frequently Asked Questions
What size blinds do I need for a Oak Creek home?
Start from typical manufactured-home width bands — roughly 22"–28" for small bedrooms and baths, 30"–36" for primary bedrooms, 48"–60" for living-area horizontal sliders, and 68×80 patio territory on many double-wides — then measure each opening. Oak Creek plants and series reuse factory window modules, but call sizes still vary by floor plan and year. Order custom-cut blinds to your exact widths; do not assume a 34.5" production-builder blind will fit.
Will standard 34.5" builder blinds fit my Oak Creek manufactured home?
Usually not without measuring. Manufactured homes use factory modules with widths that often fall outside the suburban production-builder chart. Measure each opening and order custom-cut blinds to the exact width you need.
Inside or outside mount on a Oak Creek home?
Check depth first. Manufactured frames are often under 1½" clear return. If depth fails, plan outside mount on the trim face — especially for 2" faux wood. 1" vinyl mini may inside-mount when roughly 1" clear depth is available at both top corners.
Do you ship blinds to mobile home parks?
Yes — we ship nationwide. Provide the home address, lot number, and any gate or office delivery instructions when ordering to a land-lease community. In Dallas–Fort Worth, schedule a free measure for a quote with installation included; outside DFW we ship for DIY or local install.
What blinds are best for a Oak Creek home?
1" vinyl mini blinds are the default for Oak Creek bedrooms and baths — slim headrail, custom width, cordless lift. Step up to 2" faux wood (often outside mount) in living areas, and use 3.5" vertical blinds or rollers on living-area sliders and patio doors. Pick one product and color for the whole home when you can.
Official Oak Creek resources
We are not affiliated with Oak Creek Homes. These links go to Oak Creek's own homeowner and homebuyer sites — useful for warranties, move-in questions, and what may be included with your home. We do not control or endorse their content.
Related Homeowner Guides
More sizing and buying guidance for production homes and new construction.
More for property owners
Outfitting a new home?
Shop stocked builder widths, or have us do the whole home at once. In the Dallas–Fort Worth metro we can usually measure the same day and install within about five days, and we ship nationwide.