Inner-ring DFW housing types behind the measurements
Dallas's early streetcar suburbs and Fort Worth's near-downtown neighborhoods share pre-war wood-frame construction — double-hung windows, decorative trim, and front porches. Many were later split into duplexes or updated with vinyl replacements that changed depth opening by opening.
- Craftsman bungalow (1910s–1930s): wide trim, tapered columns, often grouped front windows — Lakewood, M Streets, Winnetka Heights
- Tudor revival (1920s–1940s): casements and multi-pane groups, steep gables — Hollywood/Santa Monica area, parts of East Dallas
- Early ranch infill (1950s): scattered among bungalows — mixed specs on the same block
- Converted duplex: upper/lower units with separate entrances — measure each unit independently
- Renovation window replacements: original wood double-hungs in front, vinyl in rear additions — common in Oak Cliff and Bishop Arts adjacency
- Historic district guidelines may restrict visible hardware from the street — confirm before outside mount on front elevations
Products inner-ring DFW renovation orders use most
Faux wood leads owner-occupied renovation specs. Vinyl mini covers rentals and secondary rooms. Vertical handles rear addition sliders.
2" faux wood blinds — renovation favorite
Custom width on wide bungalow trim — DFW measure and install available.
1" vinyl mini blinds
Budget bedrooms and duplex turns — custom width and length.
3.5" vertical blinds
Rear patio sliders on additions — 68×84 reorder size.
Typical opening → blind size
Typical reorder bands for DFW inner-ring renovation orders — measure each opening; do not copy from neighbors:
| Opening (approx.) | Order size | Room |
|---|---|---|
| 26"–30" | 25.5"–29.5" | Small bedroom / bath |
| 32"–36" | 31.5"–35.5" | Primary bedroom |
| 40"–48" | 39.5"–47.5" | Wide front bungalow window |
| 68" × 84" slider | 68" × 84" vertical | Rear addition slider (when present) |
Mounting by material & situation
Inner-ring DFW homes reward the same discipline as Boston triple-deckers: pick mount type from measured depth and trim profile, then pick material.
2" faux wood blinds
View product line →The upgrade line on Lakewood and East Dallas renovation projects — white or wood-tone cordless 2" PVC on wide bungalow trim when depth allows.
Inside mount — adequate wood jamb depth
Measure width at top, middle, bottom; use narrowest. Measure height left, center, right; use longest. Needs roughly 1½"–2½" clear before ordering inside mount.
- Min depth:
- ≈ 1½"–2½"
- Hardware:
- Heavier brackets; #8 wood screws into solid trim
Outside mount on wide Craftsman trim
Pro often usedWhen tapered trim, sash horns, or shallow returns block inside mount, face-mount on the flat trim board. Common on front parlors in Lakewood and Munger Place.
- Min depth:
- N/A — mounts on trim face
- Hardware:
- Extended brackets or spacer blocks when trim is proud of the wall
Grouped front windows
Pro often usedBungalows often have two or three adjacent double-hungs on the front elevation — measure each opening separately; do not assume one width for the group.
1" vinyl mini blinds
View product line →Budget line on rental duplexes, rear bedrooms, and secondary openings — slim headrail fits some jambs faux wood cannot.
Inside mount — shallow secondary openings
Under 1½" depth may need outside mount even for vinyl mini. Measure both top corners — settlement is common on 1920s frames.
- Min depth:
- ≈ 1" clear for inside mount
Converted duplex units
Upper and lower units often have different window ages after separate renovations — measure both sides of the house independently.
3.5" vertical blinds
View product line →Rear additions and 1960s–70s kitchen expansions with patio sliders — less common on original bungalow stock but standard on duplex back units.
Wall-mount track above rear slider
Pro often usedFace-mount when the header is uneven after decades of settlement. Measure glass width exactly.
When to schedule pro install on inner-ring DFW homes
Whole-house bungalow orders with mixed mount types — inside mount in the rear, outside mount on wide front trim — are where our DFW measure-and-install team saves the most rework. We are headquartered in Irving and serve Lakewood, East Dallas, Oak Cliff, Lake Highlands, and older Fort Worth neighborhoods weekly. Book free in-home measure before ordering a full-house spec; we confirm depth, mount type, and SKU list in one visit.
Frequently asked questions
Can I inside-mount faux wood in a Lakewood bungalow?
Only if you have roughly 1½"–2½" of clear depth in the frame for the headrail and brackets. Many bungalow jambs are too shallow once wide trim is counted — outside mount on the trim face is the usual fix. Measure depth before choosing faux wood over vinyl mini.
Do you install in Lakewood and East Dallas?
Yes — we offer free in-home measuring and professional installation throughout Dallas and the full DFW metro from our Irving headquarters.
Why do my bungalow windows need different sizes in every room?
Pre-war and early post-war homes were not built from repeating builder modules. Decades of renovation, duplex conversion, and window replacement mean each opening can differ — measure every window before a whole-house order.
Do historic districts restrict blinds in Dallas?
Some conservation districts have guidelines on visible changes from the street. Treatments are usually allowed, but confirm with your district or HOA before outside mount on front elevations.
Related guides
- DFW ranch & Mid-Cities guide
Postwar ranch picture windows and patio sliders — different stock than inner-ring.
- DFW master-planned guide
North Collin production modules — 34.5" bedroom widths.
- Blinds for rental homes
Landlord specs on converted duplex and bungalow rentals.
- Dallas service area
Uptown, East Dallas, North Dallas — local install.
- Schedule free measure
Book in-home measuring for whole-house bungalow orders.